D-Link xStack Reference Manual page 849

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To configure an OSPF area's settings:
DGS-3620-28SC:admin# config ospf area 10.48.74.122 type stub stub_summary
enabled metric 1
Command: config ospf area 10.48.74.122 type stub stub_summary enabled metric 1
Success.
DGS-3620-28SC:admin#
73-8 delete ospf area
Description
This command is used to delete an OSPF area.
Format
delete ospf area <area_id>
Parameters
<area_id> - Enter the OSPF area ID used here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an OSPF area:
DGS-3620-28SC:admin# delete ospf area 10.48.74.122
Command: delete ospf area 10.48.74.122
Success.
DGS-3620-28SC:admin#
73-9 show ospf area
Description
This command is used to display an OSPF area's configuration.
Format
show ospf area {<area_id>}
844