D-Link xStack Reference Manual page 413

Dgs-3620 series layer 3 managed stackable gigabit switch
Hide thumbs Also See for xStack:
Table of Contents

Advertisement

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Next Server
DGS-3620-28SC:admin#
24-22 show dhcp pool manual_binding
Description
This command is used to display the configured manual binding entries.
Format
show dhcp pool manual_binding {<pool_name 12>}
Parameters
<pool_name 12> - (Optional) Specify the DHCP pool name.
Restrictions
None.
Example
To display the configured manual binding entries:
DGS-3620-28SC:admin#show dhcp pool manual_binding
Command: show dhcp pool manual_binding
Pool Name
IP Address
------------ ------------- ------------------ --------
p1
192.168.0.1
p1
192.168.0.2
Total Entries : 2
DGS-3620-28SC:admin#
24-23 enable dhcp_server
Description
This command is used to enable the DHCP server function.
If DHCP relay is enabled, DHCP server cannot be enabled. The opposite is also true. For Layer 2
switches, if DHCP client is enabled on the only interface, then DHCP server cannot be enabled.
For layer 3 switches, when the System interface is the only interface then can DHCP client be
enabled. If the DHCP client is enabled, then the DHCP server cannot be enabled.
Format
enable dhcp_server
: 10.10.10.2
Hardware Address
00-80-C8-08-13-88
00-80-C8-08-13-99
Type
Ethernet
Ethernet
408

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack dgs-3620-28sc

Table of Contents