Show Switch - D-Link xStack Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Total Entries: 1
CTRL+C ESC q Quit
2-8

show switch

Description
This command is used to display the switch information.
Format
show switch
Parameters
None.
Restrictions
None.
Example
To display the switch information:
DGS-3620-28SC:admin#show switch
Command: show switch
Device Type
MAC Address
IP Address
VLAN Name
Subnet Mask
Default Gateway
Boot PROM Version
Firmware Version
Hardware Version
Firmware Type
Serial Number
System Name
System Location
System Uptime
System Contact
Spanning Tree
GVRP
IGMP Snooping
MLD Snooping
RIP
RIPng
DVMRP
SPACE n Next Page p
: DGS-3620-28SC Gigabit Ethernet Switch
: 00-01-02-03-04-00
: 10.90.90.90 (Manual)
: default
: 255.0.0.0
: 0.0.0.0
: Build 1.00.016
: Build 2.50.014
: B1
: EI
: D1234567890
:
:
: 0 days, 0 hours, 7 minutes, 13 seconds
:
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
Previous Page r Refresh
15