D-Link xStack Reference Manual page 506

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
unit - Specifies the unit ID in the stacking system. If not specified, it refers to the master unit.
<unit_id> - Enter the unit ID value here.
<drive_id> - Specifies the drive ID. If not specified, it refers to the current drive.
<pathname> - Enter the directory to be removed. The path name can be specified either as a full
path name or partial name. For a partial path name, it indicates the file is in the current
directory.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete an empty directory:
DGS-3620-28SC:admin#rd c:/abc
Command: rd c:/abc
Success.
DGS-3620-28SC:admin#
38-4 cd
Description
This command is used to change the current directory. The user can change the current directory
to another drive using this command. The current drive and current directory will be displayed if the
<pathname> is not specified.
Format
cd {<pathname>}
Parameters
<pathname> - (Optional) Specify the directory to be changed. The path name can be specified
either as a full path name or partial name. For a partial path name, it indicates the file is in the
current directory.
Restrictions
None.
Example
To change a work directory:
DGS-3620-28SC:admin#cd d1
Command: cd d1
501