D-Link xStack Reference Manual page 541

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
None.
Example
To show IGMP snooping:
DGS-3620-28SC:admin#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval
Querier State
Querier Role
Querier IP
Querier Expiry Time
State
Fast Leave
Rate Limit
Proxy Reporting
Proxy Reporting Source IP
Version
Total Entries: 1
DGS-3620-28SC:admin#
43-8 show igmp_snooping group
Description
This command is used to display the current IGMP snooping group configuration on the switch.
Format
show igmp_snooping group {[vlan <vlan_name 32> | vlanid <vlanid_list> | ports <portlist>]
{<ipaddr>}}
Parameters
vlan - (Optional) Specify the name of the VLAN for which you want to view IGMP snooping group
configuration information.
<vlan_name 32> - Specify the VLAN name. The maximum length is 32 characters.
vlanid - (Optional) Specify the ID of the VLAN for which to view IGMP snooping group
information.
<vlanid_list> - Enter the VLAN ID list.
ports - (Optional) Specify the list of ports for which to view IGMP snooping group information.
: Disabled
: default
: 125
: 10
: 2
: 1
: Disabled
: Non-Querier
: 0.0.0.0
: 0 secs
: Disabled
: Disabled
: No Limitation
: Disabled
: 0.0.0.0
: 3
536