D-Link xStack Reference Manual page 902

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
None.
Example
To list all the entries of multicast routing:
DGS-3620-28SC:admin# show pim ipmroute
Command: show pim ipmroute
PIM IP Multicast Route Table
UA = Upstream AssertTimer
AM = Assert Metric
AMPref = Assert MetricPref
ARB = Assert RPTBit
Group Address Source Address
---------------- ----------------- ---- ---- ------ ---- ---- ------- ----
225.0.0.0 12.90.90.90/32
225.0.0.1 12.90.90.90/32
225.0.0.5 12.90.90.90/32
225.7.7.5 12.90.90.90/32
226.0.0.0 12.90.90.90/32
227.0.0.3 12.90.90.90/32
232.0.0.0 12.90.90.114/32
239.255.255.250 12.90.90.90/32
Total Entries: 8
DGS-3620-28SC:admin#
77-14 create pim static_rp group
Description
This command is used to create a static RP.
Format
create pim static_rp group <network_address> rp <ipaddr>
Parameters
group - Specifies to assign the multicast group address for this static RP.
<network_address> - Enter the multicast group address used here.
rp - Specifies the IP address used by this static RP.
<ipaddr> - Enter the IP address used here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
UA AM AMPref
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
897
ARB Flag Type Mode
0 RPT (*.G)
0 RPT (*.G)
0 RPT (*.G)
0 RPT (*.G)
0 RPT (*.G)
0 RPT (*.G)
0 SPT (S.G)
0 RPT (*.G)
ASM
ASM
ASM
ASM
ASM
ASM
SSM
ASM