Show Lldp Ports - D-Link xStack Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
To exclude the MAC/PHY configuration/status TLV from the outbound LLDP advertisements for all
ports:
DGS-3620-28SC:admin#config lldp ports all dot3_tlvs
mac_phy_configuration_status enable
Command: config lldp ports all dot3_tlvs mac_phy_configuration_status enable
Success.
DGS-3620-28SC:admin#
57-8

show lldp ports

Description
This command is used to display LLDP per port configuration for advertisement options.
Format
show lldp ports {<portlist>}
Parameters
<portlist> - (Optional) Specify the ports to be displayed.
Note: When a port list is not specified, information for all ports will be displayed.
Restrictions
None.
Example
To display LLDP TLV option port 1:
689