D-Link xStack Reference Manual page 765

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Listener Query Interval
Querier State
Querier Role
Querier IP
Querier Expiry Time
State
Fast Done
Proxy Reporting
Proxy Reporting Source IP
Rate Limit
Version
Total Entries: 1
DGS-3620-28SC:admin#
65-16 show mld_snooping group
Description
This command is used to display the current MLD snooping group information on the switch.
Format
show mld_snooping group {[vlan <vlan_name 32> | vlanid <vlanid_list> | ports <portlist>]
{<ipv6addr>}}
Parameters
vlan - (Optional) Specify the name of the VLAN for which to view MLD snooping group
information. If VLAN and ports and IP address are not specified, the system will display all
current MLD snooping group information.
<vlan_name 32> - Specify the VLAN name. The maximum length is 32 characters.
vlanid - (Optional) Specify the ID of the VLAN for which to view MLD snooping group information.
<vlanid_list> - Enter the VLAN ID list.
ports - (Optional) Specify the list of port for which to view MLD snooping group information.
<portlist> - Enter a range of ports to be displayed.
<ipv6addr> - (Optional) Specify the group IPv6 address for which to view MLD snooping group
information.
If no parameter is specified, the system will display all MLD snooping groups on the switch.
Restrictions
None.
: default
: 125
: 10
: 2
: 1
: Disabled
: Non-Querier
: ::
: 0 secs
: Disabled
: Disabled
: Enabled
: ::
: No Limitation
: 2
760