D-Link xStack Reference Manual page 350

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
Configure BGP to show network information:
DGS-3620-28SC:admin# debug bgp show network
Command: debug bgp show network
Network
-------------
192.168.0.0/8
172.16.0.0/16
Total Entries :2
DGS-3620-28SC:admin#
21-46 debug bgp show aggregate
Description
This command is used for displaying current aggregate's configuration in BGP protocol stack.
Format
debug bgp show aggregate
Parameters
None.
Restrictions
Only Administrator-level users can issue this command. (EI Mode Only Command)
Example
Configure BGP to show aggregate information:
DGS-3620-28SC:admin# debug bgp show aggregate
Command: debug bgp show aggregate
Network Summary Only
------------- ------------
192.168.0.0/8 YES
172.16.0.0/16 NO
Total Entries :2
DGS-3620-28SC:admin#
Route Map
-----------
NULL
map1
AS Set
------
NO
NO
Suppress Count
-------------
0
2
345