D-Link xStack Reference Manual page 447

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
<ipv6networkaddr> - Enter the IPv6 prefix assigned to the pool here.
<value 1-128> - Enter the length of the prefix, in bits, assigned to the user from the pool here.
The value of the assigned-length argument cannot be less than the value of the prefix-length.
<ipif_name 12> - Enter the name of the IP interface used for this prefix delegation.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a DHCPv6 prefix pool prefixpool1 for interface System:
DGS-3620-28SC:admin#config dhcpv6 pool prefix_delegation prefixpool1 1111::/48
64 System
Command: config dhcpv6 pool prefix_delegation prefixpool1 1111::/48 64 System
Success.
DGS-3620-28SC:admin#
27-10 show dhcpv6 manual_binding
Description
This command will display the manual binding entries for the selected or all DHCPv6 pools.
Format
show dhcpv6 manual_binding {<pool_name 12>}
Parameters
<pool_name 12> - (Optional) Enter the DHCPv6 pool name used here. This name can be up to
12 characters long.
If no parameter is specified, then all the entries will be displayed.
Restrictions
None.
Example
To display the manual binding entries of the DHCPv6 pool:
442