D-Link xStack Reference Manual page 971

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28SC:admin# show ptp ports 1:1-1:4
Command: show ptp ports 1:1-1:4
The active attributes:
DM : Delay Mechanism
AI : Announce Interval
ART : Announce Receipt Timeout
SI : Synchronization Interval
DRIM: Delay_Request Interval-Master
DRIS: Delay_Request Interval-Slave
PDRI: Pdelay_Request Interval
PMPD: Peer Mean Path Delay
Port Role DM
1:1 Master P2P
1:2 Slave E2E
1:3 Master P2P
1:4 Master P2P
DGS-3620-28SC:admin#
To show the active attributes for special ports 1:1-1:4 of the p2p-transparent clock:
DGS-3620-28SC:admin# show ptp ports 1:1-1:4
Command: show ptp ports 1:1-1:4
The active attributes:
PDRI : Pdelay_Request Interval
PMPD : Peer Mean Path Delay
Port PDRI
1:1 4
1:2 8
1:3 8
1:4 16
DGS-3620-28SC:admin#
83-14 show ptp boundary
Description
This command is used to display the configured attributes of the boundary clock or the configured
attributes of the boundary clock's special ports.
Format
show ptp boundary {ports [<portlist> | all]}
AI ART SI
2 8 1
1 8 0.5
2 8 1
2 8 1
PMPD State
1 Enabled
0 Disabled
1 Enabled
1 Enabled
DRIM DRIS PDRI
1 2
2 8
8 4
32 16 16
966
PMPD State
4 1 Enabled
8 0 Enabled
8 1 Enabled
0 Enabled