D-Link xStack Reference Manual page 618

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
show address_binding {ports {<portlist>}}
Parameters
ports – (Optional) Specify to display the state of IP MAC port binding for all ports.
<portlist> - Enter the list of ports for the display here.
Restrictions
None.
Example
To display address binding information:
DGS-3620-28SC:admin#show address_binding
Command: show address_binding
Roaming state
Trap/Log
DHCP Snoop(IPv4)
DHCP Snoop(IPv6)
ND Snoop
Autosave state
Save Filename
Function Version
DGS-3620-28SC:admin#
To display address binding information for ports 1 to 10:
DGS-3620-28SC:admin#show address_binding ports 1:1-1:10
Command: show address_binding ports 1:1-1:10
ARP:ARP Inspection
Port ARP IP
----- -------- -------- -------- ---- --------- ----------- --------------
1:1 Disabled Disabled Disabled All
1:2 Disabled Disabled Disabled All
1:3 Disabled Disabled Disabled All
1:4 Disabled Disabled Disabled All
1:5 Disabled Disabled Disabled All
1:6 Disabled Disabled Disabled All
1:7 Disabled Disabled Disabled All
1:8 Disabled Disabled Disabled All
1:9 Disabled Disabled Disabled All
1:10 Disabled Disabled Disabled All
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
: dhcpsnp.cfg
: 3.95
IP:IP Inspection
ND Prot Zero IP
ND:ND Inspection
DHCP Packet Stop Learning
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
613
Prot:Protocol
Threshold/Mode
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal