Show Authen_Enable [Default | Method_List_Name <String 15> | All]; Config Authen Application [Console | Telnet | Ssh | Http | All] [Login | Enable] - D-Link xStack Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
4-13 show authen_enable
Description
This command is used to display the method list of authentication methods for promoting a user's
privilege to Administrator level.
Format
show authen_enable [default | method_list_name <string 15> | all]
Parameters
default - Specifies to display the default method list for promoting a user's privilege to
Administrator level.
method_list_name - Specifies the user-defined method list for promoting a user's privilege to
Administrator level.
<string 15> - Enter the user-defined method list for a promoting a user's privilege to
Administrator level . The method list name value can be up to 15 characters long.
all - Specifies to display all method lists for promoting a user's privilege to Administrator level.
Restrictions
Only Administrator-level users can issue this command.
Example
To display all method lists for promoting a user's privilege to Administrator level:
DGS-3620-28SC:admin#show authen_enable all
Command: show authen_enable all
Method List Name
----------------
default
enable_list_1
enable_list_2
Total Entries : 3
DGS-3620-28SC:admin#
4-14 config authen application
Description
This command is used to configure login or enable method list for all or the specified application.
Priority Method Name
-------- ---------------
1 local_enable
1 tacacs+
2 tacacs
3 mix_1
4 loca_enable
1 tacacs+
2 radius
Comment
------------------
Keyword
Built-in Group
Built-in Group
User-defined Group
Keyword
Built-in Group
Built-in Group
66