D-Link xStack Reference Manual page 653

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To display JWAC authentication entries for ports 1 to 2:
DGS-3620-28SC:admin#show jwac auth_state ports 1-2
Command: show jwac auth_state ports 1-2
Pri:Priority. State – A:Authenticated. B:Bloacked. -:Authenticating
Time – Aging Time/Idle Time for authenticated entries.
Port MAC Address
----- -----------------
-
1 00-00-00-00-00-42
1 00-00-12-34-56-02
2 00-00-DF-12-E5-6A
2 00-03-38-10-28-01
Total Authenticating Hosts
Total Authenticated Hosts
Total Blocked Hosts
DGS-3620-28SC:admin#
51-25 show jwac update_server
Description
This command is used to display the JWAC update server.
Format
show jwac update_server
Parameters
None.
Restrictions
None.
Example
To display the JWAC update server:
DGS-3620-28SC:admin#show jwac update_server
Command: show jwac update_server
Index IP
----- ------------------
1 172.18.0.0/21
2 172.18.0.0/21
State VID Pri Time
-- ---- -- -------- ------------------- -------------
- - - 4
- - - 21
- - - 24
- - - 13
: 4
: 0
: 0
TCP/UDP Port State
------ ---- -------
TCP 1 Active
TCP 2 Active
648
IP
-
-
-
-
User Name
-
-
-
-