D-Link xStack Reference Manual page 198

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
remote_as - The number of Autonomous Systems to which the neighbor belongs.
<as_number 1-4294967295> - Enter the remote AS number here. This value must be
between 1 and 4294967295.
peer_group - Specifies the peer group to be created and added as a neighbor.
<peer_group_name 16> - Enter the peer group name here. This name can be up to 16
characters long.
peer_group - Specifies the peer group to be created and added as a neighbor.
<peer_group_name 16> - Enter the peer group name here. This name can be up to 16
characters long.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
To create a neighbor peer whose address is 10.10.10.2:
DGS-3620-28SC:admin#
Command: create bgp neighbor 10.10.10.2 remote_as 10
Success.
DGS-3620-28SC:admin#
13-21 delete bgp neighbor
Description
This command is used to delete the BGP neighbor.
Format
delete bgp neighbor [<ipaddr> | peer_group <peer_group_name 16> | all]
Parameters
<ipaddr> - Specifies the IP address of the neighbor that will be deleted.
peer_group - Specifies the peer group that will be deleted as a neighbor.
<peer_group_name 16> - Enter the peer group name here. This name can be up to 16
characters long.
all - Delete all BGP neighbors, including individual peers and peer groups.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
To delete a neighbor whose address is 10.10.10.2:
create bgp neighbor 10.10.10.2 remote_as 10
193