D-Link xStack Reference Manual page 351

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
21-47 debug bgp show damp
Description
This command is used for displaying current dampening configuration and corresponding dynamic
information in BGP protocol stack.
Format
debug bgp show damp
Parameters
None.
Restrictions
Only Administrator-level users can issue this command. (EI Mode Only Command)
Example
Configure BGP to show current dampening information:
DGS-3620-28SC:admin# debug bgp show damp
Command: debug bgp show damp
Route Map
Reach Half Life Time is
Reuse Value
Suppress Value
MAX Suppress Time
Unreach Half Life Time is
Reuse Index Size
Reuse List Size
Reuse Offset
Current dampened routes:
Damp Reuse List Info:
reuse_index index
suppress_time evt
show BGP Damp no reuse list info: 0
index ptr penalty flap
BGP Damp Decay List Info:
decay array size is 90.
Index Value
----- -----
1 1
2 0.969663
: NULL
: 900 seconds
: 750
: 2000
: 3600 seconds
: 900 seconds
: 1024
: 256
: 19
ptr penalty flap
start_time t_updated
start_time t_updated
suppress_time evt
346