D-Link xStack Reference Manual page 528

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
all – Specifies that all the multicast IP addresses will be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete the IGMP static group, with the multicast IP address 225.0.0.2 on the IP interface
"System".
DGS-3620-28SC:admin# delete igmp static_group ipif System group 225.0.0.2
Command: delete igmp static_group ipif System group 225.0.0.2
Success.
DGS-3620-28SC:admin#
To delete all IGMP static groups on the IP interface "n2".
DGS-3620-28SC:admin# delete igmp static_group ipif n2 all
Command: delete igmp static_group ipif n2 all
Success.
DGS-3620-28SC:admin#
41-8 show igmp static_group
Description
This command is used to display IGMP static groups on the Switch.
Format
show igmp static_group {ipif <ipif_name 12>}
Parameters
ipif – (Optional) Specifies the IP interface name used for this configuration.
<ipif_name 12> - Enter the IP interface name used for this configuration here. This name can
be up to 12 characters long.
Restrictions
None.
Example
To display all IGMP static groups on the interface "n20":
523