D-Link xStack Reference Manual page 576

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28SC:admin# clear ip prefix_list counter list_name 192.168.10.0/24
Command: clear ip prefix_list counter list_name 192.168.10.0/24
Success.
DGS-3620-28SC:admin#
46-10 create route_map
Description
This command is used to create a route map.
Format
create route_map <map_name 16>
Parameters
<map_name 16> - Enter the route map name used here. This name can be up to 16 characters
long.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a route map named "map1":
DGS-3620-28SC:admin# create route_map map1
Command: create route_map map1
Success.
DGS-3620-28SC:admin#
46-11 config route_map
Description
This command is used to configure the route map. A route map can have multiple rule entries,
each with a different sequence number. When creating a route map, a sequence ID of 10 will be
added to the route map. If the sequence number is not specified, it will be automatically given. The
automatically given sequence number will be a multiple of 10. If neither permit nor deny is
specified, permit is implied.
Format
config route_map <map_name 16> [[add | delete] sequence <value 1-65535> {[deny | permit]}
| sequence <value 1-65535> [match [add | delete] [as_path <list_name 16> | community_list
<list_name 16> {exact} | ip [next_hop | address] {prefix_list} <list_name 16> | metric <uint 0-
571