D-Link xStack Reference Manual page 234

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
This example sets the maximum number of prefixes that will be accepted from the neighbor
192.168.1.1 to 5000, when 50 percent of the maximum prefix limit has been reached. This will
display a warning message:
DGS-3620-28SC:admin#
Command: config bgp neighbor maximum_prefix 192.168.1.1 5000 50
Success.
DGS-3620-28SC:admin#
13-57 clear bgp flap_statistics
Description
The command is used to clear the accumulated penalties for routes that have been received on a
router that has BGP dampening enabled. If no arguments or keywords are specified, flap statistics
are cleared for all routes.
Format
clear bgp flap_statistics {[<ipaddr> | <network_address>]}
Parameters
<ipaddr> - (Optional) Specifies an IPv4 address to clear the dampening flap statistics.
<network_address> - (Optional) Specifies an IPv4 network to clear the dampening flap
statistics.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
This is an example to clear the route dampening flap statistics of network 192.168.1.0/24:
DGS-3620-28SC:admin#
Command: clear bgp flap_statistics 192.168.1.0/24
Success.
DGS-3620-28SC:admin#
config bgp neighbor maximum_prefix 192.168.1.1 5000 50
clear bgp flap_statistics 192.168.1.0/24
229