D-Link xStack Reference Manual page 973

Dgs-3620 series layer 3 managed stackable gigabit switch
Hide thumbs Also See for xStack:
Table of Contents

Advertisement

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
show ptp p2p_transparent ports [<portlist> | all]
Parameters
ports - Specifies the list of port used for this display.
<portlist> - Enter the list of port used for this display here.
all - Specifies that all the ports will be used for this display.
Restrictions
None.
Example
To show the configured attributes of special ports 1:1-1:4 of the p2p_transparent clock:
DGS-3620-28SC:admin# show ptp p2p_transparent ports 1:1-1:4
Command: show ptp p2p_transparent ports 1:1-1:4
The attribute configuration of the p2p_transparent ports:
PDRI : Pdelay_Request Interval
Port
PDRI
1:1
8
1:2
16
1:3
8
1:4
4
DGS-3620-28SC:admin#
83-16 show ptp foreign_master_records ports
Description
This command is used to display the current foreign master data set records of the boundary
clock's special ports.
Format
show ptp foreign_master_records ports [<portlist> | all]
Parameters
ports - Specifies the list of port used for this display.
<portlist> - Enter the list of port used for this display here.
all - Specifies that all the ports will be used for this display.
Restrictions
None.
State
Enabled
Enabled
Enabled
Disabled
968

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack dgs-3620-28sc

Table of Contents