D-Link xStack Reference Manual page 762

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
vlan - Specifies the name of the VLAN on which the router port resides.
<vlan_name 32> - Enter the name of the VLAN on which the router port resides. The
maximum length is 32 characters.
vlanid - Specifies the ID of the VLAN on which the router port resides.
<vlanid_list> - Enter a list of VLAN IDs.
add - Specifies to add router ports.
delete - Specifies to delete router ports.
<portlist> - Enter a range of ports to be configured.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set up static router ports:
DGS-3620-28SC:admin#config mld_snooping mrouter_ports vlan default add 1-10
Command: config mld_snooping mrouter_ports vlan default add 1-10
Success.
DGS-3620-28SC:admin#
65-12 config mld_snooping mrouter_ports_forbidden
Description
This command allows you to designate a range of ports as being not connected to multicast-
enabled routers. This ensures that the forbidden router port will not propagate routing packets out.
Format
config mld_snooping mrouter_ports_forbidden [vlan <vlan_name 32> | vlanid <vlanid_list>]
[add | delete] <portlist>
Parameters
vlan - Specifies the name of the VLAN on which the router port resides.
<vlan_name 32> - Enter the name of the VLAN on which the router port resides. The
maximum length is 32 characters.
vlanid - Specifies the ID of the VLAN on which the router port resides.
<vlanid_list> - Enter a list of VLAN IDs.
add - Specifies to add router ports.
delete - Specifies to delete router ports.
<portlist> - Enter a range of ports to be configured.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
757