D-Link xStack Reference Manual page 372

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28SC:admin# debug super_vlan state disable
Command: debug super_vlan state disable
Success.
DGS-3620-28SC:admin#
After enabling super VLAN debug, the following information may appear when receive an ARP
packet form sub VLAN.
The ARP request packet received from sub vlan 200.
21-78 debug show address_binding binding_state_table
Description
This command is used to display the binding state of the entries in the binding state table.
Format
debug show address_binding binding_state_table [nd_snooping | dhcpv6_snooping]
Parameters
nd_snooping - Specifies to debug ND Snooping bound addresses in the binding state table.
dhcpv6_snooping - Specifies to debug DHCPv6 Snooping bound addresses in the binding state
table.
Restrictions
Only Administrator-level users can issue this command.
Example
To display the DHCPv6 snooping binding state of entries:
DGS-3620-28SC:admin# debug show address_binding binding_state_table
dhcpv6_snooping
Command: debug show address_binding binding_state_table dhcpv6_snooping
S (State) - S: Start, L: Live, D :Detection, R: Renew, B: Bound
Time - Expiry Time (sec)
IP Address
--------------------------------------- ----------------- -- ---------- -----
2001:2222:1111:7777:5555:6666:7777:8888
2001::1
Total Entries : 2
DGS-3620-28SC:admin#
MAC Address
00-00-00-00-00-02 S
00-00-00-00-03-02 B
367
S Time Port
50 5
100 6