Show Access_Profile {[Profile_Id <Value 1-6> | Profile_Name <Name 1-32>] - D-Link xStack Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
5-4 show access_profile
Description
This command is used to display the current access list table.
Format
show access_profile {[profile_id <value 1-6> | profile_name <name 1-32>]}
Parameters
profile_id - (Optional) Specify the index of the access list profile.
<value 1-6> - Enter the profile ID between 1 and 6.
profile_name - (Optional) Specify the name of the access list profile.
<name 1-32> - Enter the profile name between 1 and 32.
Restrictions
None.
Example
To display the current access list table:
DGS-3620-28SC:admin#show access_profile
Command: show access_profile
Access Profile Table
Total User Set Rule Entries : 2
Total Used HW Entries
Total Available HW Entries
==============================================================================
Profile ID: 1
Mask on
VLAN
802.1p
Ethernet Type
Available HW Entries : 255
------------------------------------------------------------------------------
Rule ID : 1
Match on
VLAN ID
802.1p
Ethernet Type
Action:
: 3
: 1533
Profile name: EtherACL
: 0xFFF
Ports: 1
: 1
: 7
: 0xFFFF
Type: Ethernet
107