D-Link xStack Reference Manual page 617

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
delete address_binding ip_mac [all | ipaddress <ipaddr> mac_address <macaddr> |
ipv6address <ipv6addr> mac_address <macaddr>]
Parameters
all - Specifies that all the MAC addresses will be used.
vlan_name - Specifies the name of the VLAN that the MAC address belongs to.
<vlan_name> - Enter the VLAN name used here.
mac_address - Specifies the MAC address of the IMPB entry.
<macaddr> - Enter the MAC address of the IMPB entry here.
ipv6address - Specifies the IPv6 address of the IMPB entry.
<ipv6addr> - Enter the IPv6 address of the IMPB entry here.
mac_address - Specifies the MAC address of the IMPB entry.
<macaddr> - Enter the MAC address of the IMPB entry here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an IMPB entry that binds the IP address 10.1.1.1.1 to the MAC address 00-00-00-00-00-
11:
DGS-3620-28SC:admin# delete address_binding ip_mac ipaddress 10.1.1.1
mac_address 00-00-00-00-00-11
Command: delete address_binding ip_mac ipaddress 10.1.1.1 mac_address 00-00-00-
00-00-11
Success.
DGS-3620-28SC:admin#
To delete a static ipv6 IMPB entry that binds the IPv6 address fe80::240:5ff:fe00:28 to the MAC
address 00-00-00-00-00-11:
DGS-3620-28SC:admin# delete address_binding ip_mac ipv6address
fe80::240:5ff:fe00:28 mac_address 00-00-00-00-00-11
Command: delete address_binding ip_mac ipv6address fe80::240:5ff:fe00:28
mac_address 00-00-00-00-00-11
Success.
DGS-3620-28SC:admin#
50-8 show address_binding
Description
This command is used to display address binding information.
612