Show Ddm - D-Link xStack Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28SC:admin#config ddm ports 1:21 rx_power_threshold high_alarm 4.55
low_alarm 0.01 high_warning 3.5 low_warning 0.03
Command: config ddm ports 1:21 rx_power_threshold high_alarm 4.55 low_alarm
0.01 high_warning 3.5 low_warning 0.03
Success.
DGS-3620-28SC:admin#
To configure port 21's actions associate with the alarm:
DGS-3620-28SC:admin#config ddm ports 1:21 state enable shutdown alarm
Command: config ddm ports 1:21 state enable shutdown alarm
Success.
DGS-3620-28SC:admin#
12-3

show ddm

Description
This command is used to display the DDM global settings.
Format
show ddm
Parameters
None.
Restrictions
None.
Example
To display the DDM global settings:
DGS-3620-28SC:admin#show ddm
Command: show ddm
DDM Log
DDM Trap
DDM Tx/Rx Power Unit
DGS-3620-28SC:admin#
: Enabled
: Disabled
: mw
171