D-Link xStack Reference Manual page 415

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
24-25 show dhcp_server
Description
This command is used to display the current DHCP server configuration.
Format
show dhcp_server
Parameters
None.
Restrictions
None.
Example
To display the DHCP server status:
DGS-3620-28SC:admin#show dhcp_server
Command: show dhcp_server
DHCP Server Global State: Disabled
Ping Packet Number
Ping Timeout
DGS-3620-28SC:admin#
24-26 clear dhcp conflict_ip
Description
This command is used to clear an entry or all entries from the conflict IP database.
Format
clear dhcp conflict_ip [<ipaddr> | all]
Parameters
<ipaddr> - Enter the IP address to be cleared.
all - Specifies that all IP addresses will be cleared.
Restrictions
None.
: 2
: 100 ms
410