D-Link xStack Reference Manual page 224

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
advertised_routes - (Optional) Displays the routes advertised to a BGP neighbor.
received_routes - (Optional) Displays the routes received from this neighbor.
routes - (Optional) Displays routes in the routing table learned from the neighbor.
received_prefix_filter - (Optional) Displays the prefix filter information that is received from a
BGP neighbor.
statistics - (Optional) Displays the statistical information learned.
Restrictions
None. (EI Mode Only Command)
Example
To show the BGP neighbor or routes relative to one neighbor:
DGS-3620-28SC:admin# show bgp neighbor 10.10.10.2
Command: show bgp neighbor 10.10.10.2
BGP neighbor: 10.10.10.2 (Internal Peer)
-----------------------------------------------
Session State
Session Activity
Remote AS
Remote Router ID
BGP State
Hold Time
Keepalive Interval
Advertisement Interval
AS Origination Interval
Connect Retry Interval
EBGP Multihop
Weight
Next Hop Self
Remove Private As
Allowas In
Address Family IPv4 Unicast
IPv4 Unicast
Soft Reconfiguration Inbound
Send Community
Default Originate
Incoming Update Prefix List
Incoming Update Filter List
Route Map for outgoing Routes : routemap1
Unsuppress Route Map
Outbound Route Filter (ORF) type (64) Prefix list:
Send Mode
Receive Mode
Prefix Max Count
Prefix Warning Threshold
Prefix Warning Only
DGS-3620-28SC:admin#
Command: show bgp neighbor 172.16.232.178 advertised_routes
: Enabled
: Enabled
: 1
: 192.168.252.252
: Established ( UP for 00:24:25)
: 180 Seconds
: 60 Seconds
: 5 Seconds
: 15 seconds
: 120 seconds
: 2
: 100
: Disabled
: Disabled
: Enabled (Num: 3)
: None
: Enabled
: None
: Enabled
: prelist1
: ASlist1
: us_routmp1
: Enabled
: Disable
: 12000
: 75
: Disabled
show bgp neighbor 172.16.232.178 advertised_routes
219