Show Env - Dell Catalyst 3130 Command Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands

show env

Use the show env user EXEC command to display fan, temperature, and power information for the
switch or the switch stack.
Syntax Description all
stack
[switch-number]
temperature
temperature
status
| begin
| exclude
| include
expression
Though visible in the command-line help strings, the rps keyword is not supported.
Note
Command Modes User EXEC
Command History Release
12.2(40)EX1
Usage Guidelines show env user EXEC command to display the information for the switch being accessed—a standalone
switch or the stack master. Use this command with the stack and switch keywords to display all
information for the stack or for the specified stack member.
If you enter the show env temperature status command, the command output shows the switch
temperature state and the threshold level.
You can also use the show env temperature command to display the switch temperature status. The
command output shows the green and yellow states as OK and the red state as FAULTY. If you enter the
show env all command, the command output is the same as the show env temperature status command
output.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
OL-12248-03
show env {all | | stack [switch-number] | temperature [status]} [ | {begin | exclude | include}
expression]
Display the fan and temperature environmental status and the status of the internal
power supplies.
Display all environmental status for each switch in the stack or for the specified
switch. The range is 1 to 9, depending on the switch member numbers in the stack.
Display the switch temperature status.
(Optional) Display the switch internal temperature (not the external temperature)
and the threshold values.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3120 for HP Command Reference
show env
2-497