Dell Catalyst 3130 Command Reference Manual page 767

Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
This example shows how to set the port-priority value on VLANs 20 to 25:
Switch(config-if)# spanning-tree vlan 20-25 port-priority 0
You can verify your settings by entering the show spanning-tree interface interface-id privileged
EXEC command.
Related Commands Command
show spanning-tree
interface-id
spanning-tree cost
spanning-tree vlan
OL-12248-03
Description
interface Displays spanning-tree information for the specified interface.
Sets the path cost for spanning-tree calculations.
priority Sets the switch priority for the specified spanning-tree instance.
Cisco Catalyst Blade Switch 3120 for HP Command Reference
spanning-tree port-priority
2-737