Dell Catalyst 3130 Command Reference Manual page 373

Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
Examples This example shows how to enable DSCP transparency and configure the switch to not change the DSCP
value of the incoming IP packet:
Switch(config)# mls qos
Switch(config)# no mls qos rewrite ip dscp
This example shows how to disable DSCP transparency and configure the switch to change the DSCP
value of the incoming IP packet:
Switch(config)# mls qos
Switch(config)# mls qos rewrite ip dscp
You can verify your settings by entering the show running config | include rewrite privileged EXEC
command.
Related Commands Command
mls qos
show mls qos
show running-config |
include rewrite
OL-13271-03
Description
Enables QoS globally.
Displays QoS information.
Displays the DSCP transparency setting. For syntax information, select
Cisco IOS Release 12.2 Configuration Guides and Command
References > Cisco IOS Fundamentals Command Reference,
Release 12.2 > File Management Commands > Configuration File
Management Commands.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
mls qos rewrite ip dscp
2-343