Dell Catalyst 3130 Command Reference Manual page 317

Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
Examples This example shows how to configure the interfaces as upstream in group 1:
Switch# configure terminal
Switch(config)# interface port-channel 1
Switch(config-if)# link state group 1 upstream
Switch(config-if)# end
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command
link state track
show link state group
show running-config
OL-13271-03
Description
Enables a link-state group.
Displays the link-state group information.
Displays the operating configuration. For syntax information, use this link
to the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_command
_reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to navigate to
the command.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
link state group
2-287