Dell Catalyst 3130 Command Reference Manual page 484

show auto qos
This is an example of output from the show auto qos interface interface-id command when the auto
qos voip cisco-phone interface configuration command is entered:
Switch> show auto qos interface gigabitethernet1/0/2
GigabitEthernet1/0/2
auto qos voip cisco-phone
These are examples of output from the show auto qos command when auto-QoS is disabled on the
switch:
Switch> show auto qos
AutoQoS not enabled on any interface
These are examples of output from the show auto qos interface interface-id command when auto-QoS
is disabled on an interface:
Switch> show auto qos interface gigabitethernet3/0/1
AutoQoS is disabled
Related Commands Command
auto qos voip
debug auto qos
Cisco Catalyst Blade Switch 3120 for HP Command Reference
2-454
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
Description
Automatically configures QoS for VoIP within a QoS domain.
Enables debugging of the auto-QoS feature.
OL-12248-03