Show Location - Dell Catalyst 3130 Command Reference Manual

show location

show location
Use the show location user EXEC command to display location information for an endpoint.
Syntax Description
admin-tag
civic-location
elin-location
identifier id
interface interface-id
static
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.2(40)EX1
Usage Guidelines Use the show location command to display location information for an endpoint.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Cisco Catalyst Blade Switch 3120 for HP Command Reference
2-582
show location admin-tag | [ | {begin | exclude | include} expression]
show location civic-location {identifier id number | interface interface-id | static } | {begin |
exclude | include} expression]
show location elin-location {identifier id number | interface interface-id | static } | {begin |
exclude | include} expression]
Modification
This command was introduced.
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
Display administrative tag or site information.
Display civic location information.
Display emergency location information (ELIN).
Specify the ID for the civic location or the elin location. The id range
is 1 to 4095.
Display location information for the specified interface or all
interfaces. Valid interfaces include physical ports.
Display static configuration information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
OL-12248-03