Mls Qos Map - Dell Catalyst 3130 Command Reference Manual

Blade switch
Table of Contents

Advertisement

mls qos map

mls qos map
Use the mls qos map global configuration command on the switch stack or on a standalone switch to
define the class of service (CoS)-to-Differentiated Services Code Point (DSCP) map, DSCP-to-CoS
map, the DSCP-to-DSCP-mutation map, the IP-precedence-to-DSCP map, and the policed-DSCP map.
Use the no form of this command to return to the default map.
Syntax Description
cos-dscp dscp1...dscp8
dscp-cos dscp-list to
cos
dscp-mutation
dscp-mutation-name
in-dscp to out-dscp
ip-prec-dscp
dscp1...dscp8
policed-dscp dscp-list
to mark-down-dscp
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
2-334
mls qos map {cos-dscp dscp1...dscp8 | dscp-cos dscp-list to cos | dscp-mutation
dscp-mutation-name in-dscp to out-dscp | ip-prec-dscp dscp1...dscp8 | policed-dscp dscp-list
to mark-down-dscp}
no mls qos map {cos-dscp | dscp-cos | dscp-mutation dscp-mutation-name | ip-prec-dscp |
policed-dscp}
Define the CoS-to-DSCP map.
For dscp1...dscp8, enter eight DSCP values that correspond to CoS values 0
to 7. Separate each DSCP value with a space. The range is 0 to 63.
Define the DSCP-to-CoS map.
For dscp-list, enter up to eight DSCP values, with each value separated by a
space. The range is 0 to 63. Then enter the to keyword.
For cos, enter a single CoS value to which the DSCP values correspond. The
range is 0 to 7.
Define the DSCP-to-DSCP-mutation map.
For dscp-mutation-name, enter the mutation map name.
For in-dscp, enter up to eight DSCP values, with each value separated by a
space. Then enter the to keyword.
For out-dscp, enter a single DSCP value.
The range is 0 to 63.
Define the IP-precedence-to-DSCP map.
For dscp1...dscp8, enter eight DSCP values that correspond to the IP
precedence values 0 to 7. Separate each DSCP value with a space. The range
is 0 to 63.
Define the policed-DSCP map.
For dscp-list, enter up to eight DSCP values, with each value separated by a
space. Then enter the to keyword.
For mark-down-dscp, enter the corresponding policed (marked down) DSCP
value.
The range is 0 to 63.
Chapter 2
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
OL-13271-03

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3032

Table of Contents