Flash_Init - Dell Catalyst 3130 Command Reference Manual

flash_init

flash_init
Use the flash_init boot loader command to initialize the flash file system.
Syntax Description
This command has no arguments or keywords.
Defaults
The flash file system is automatically initialized during normal system operation.
Command Modes Boot loader
Command History Release
12.2(40)EX1
Usage Guidelines
During the normal boot process, the flash file system is automatically initialized.
Use this command to manually initialize the flash file system. For example, you use this command
during the recovery procedure for a lost or forgotten password.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
A-10
flash_init
Modification
This command was introduced.
Appendix A Cisco Catalyst Blade Switch 3130 and 3032 for Dell Boot Loader Commands
OL-13271-03