Session - Dell Catalyst 3130 Command Reference Manual

session

session
Use the session privileged EXEC command on the stack master to access a specific stack member.
Syntax Description
stack-member-number
Defaults No default is defined.
Command Modes Global configuration
Command History Release
12.2(40)EX1
Usage Guidelines When you access the stack member, its stack member number is appended to the system prompt.
Examples This example shows how to access stack member 6:
Switch(config)# session 6
Switch-6#
Related Commands Command
reload
switch priority
switch renumber
show switch
Cisco Catalyst Blade Switch 3120 for HP Command Reference
2-434
session stack-member-number
Modification
This command was introduced.
Description
Reloads the stack member and puts a configuration change into effect.
Changes the stack member priority value.
Changes the stack member number.
Displays information about the switch stack and its stack members.
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
Specify the stack member number. The range is 1 to 9.
OL-12248-03