Clear Lacp - Dell Catalyst 3130 Command Reference Manual

clear lacp

clear lacp
Use the clear lacp privileged EXEC command on the switch stack or on a standalone switch to clear
Link Aggregation Control Protocol (LACP) channel-group counters.
Syntax Description channel-group-number
counters
Defaults No default is defined.
Command Modes Privileged EXEC
Command History Release
12.2(40)EX1
Usage Guidelines You can clear all counters by using the clear lacp counters command, or you can clear only the counters
for the specified channel group by using the clear lacp channel-group-number counters command.
Examples This example shows how to clear all channel-group information:
Switch# clear lacp counters
This example shows how to clear LACP traffic counters for group 4:
Switch# clear lacp 4 counters
You can verify that the information was deleted by entering the show lacp counters or the show lacp 4
counters privileged EXEC command.
Related Commands Command
show lacp
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
2-84
clear lacp {channel-group-number counters | counters}
(Optional) Channel group number. The range is 1 to 64.
Clear traffic counters.
Modification
This command was introduced.
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
Description
Displays LACP channel-group information.
OL-13271-03