Debug Cisp - Dell Catalyst 3130 Command Reference Manual

Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands

debug cisp

Use the debug cisp global configuration command to enable debugging message exchanges and events
on a Client Information Signalling Protocol (CISP)-enabled interface.Use the no form of this command
to disable debugging.
Syntax Description
all
errors
events
packets
sync
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(50)SE
Related Commands Command
cisp enable
dot1x credentials
(global configuration)
profile
show cisp
OL-13271-03
debug cisp [all | errors | events | packets | sync]
no debug cisp [initialization | interface-configuration | rpc]
Modification
This command was introduced.
Description
Enables Client Information Signalling Protocol (CISP)
Configures a profile on a supplicant switch.
Displays CISP information for a specified interface.
Display all CISP debug messages.
Display CISP debug messages.
Display CISP event debug messages.
Display CISP packet debug messages.
Display CISP operational synchronization debug messages.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
debug cisp
B-5