Link State Track - Dell Catalyst 3130 Command Reference Manual

link state track

link state track
Use the link state track user EXEC command to enable a link-state group. Use the no form of this
command to disable a link-state group.
Syntax Description
number
Defaults
Link-state tracking is disabled for all groups.
Command Modes Global configuration
Command History Release
12.2(40)EX1
Usage Guidelines
Use the link state track global configuration command to enable a link-state group.
Examples This example shows how enable link-state group 2:
Switch(config)# link state track 2
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command
link state group
show link state group
show running-config
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
2-288
link state track [number]
no link state track [number]
Modification
This command was introduced.
Description
Configures an interface as a member of a link-state group.
Displays the link-state group information.
Displays the operating configuration. For syntax information, use this
link to the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_comm
and_reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to navigate
to the command.
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
(Optional) Specify the link-state group number. For a stacking-capable
switch, the group number can be 1 to 10. For a nonstacking-capable
switch, the group number can be from 1 to 2. The default is 1.
OL-13271-03