Dell Catalyst 3130 Command Reference Manual page 324

logging file
Command History Release
12.2(40)EX1
Usage Guidelines
On a stacking-capable switch, the log file is stored in ASCII text format in an internal buffer on a
standalone switch, and in the case of a switch stack, on the stack master. If a standalone switch or the
stack master fails, the log is lost unless you had previously saved it to flash memory by using the logging
file flash:filename global configuration command.
On the nonstacking-capable switch, the log file is stored in ASCII text format in an internal buffer on
the switch. You can access logged system messages by using the switch command-line interface (CLI)
or by saving them to a properly configured syslog server. If the switch fails, the log is lost unless you
had previously saved it to flash memory by using the logging file flash:filename global configuration
command.
After saving the log to flash memory by using the logging file flash:filename global configuration
command, you can use the more flash:filename privileged EXEC command to display its contents.
The command rejects the minimum file size if it is greater than the maximum file size minus 1024; the
minimum file size then becomes the maximum file size minus 1024.
Specifying a level causes messages at that level and numerically lower levels to be displayed.
Examples
This example shows how to save informational log messages to a file in flash memory:
Switch(config)# logging file flash:logfile informational
You can verify your setting by entering the show running-config privileged EXEC command.
Related Commands Command
show running-config
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
2-294
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
Modification
This command was introduced.
Description
Displays the operating configuration. For syntax information, use this
link to the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_comm
and_reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to navigate
to the command.
OL-13271-03