Dell Catalyst 3130 Command Reference Manual page 185

Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
name name
role role
Defaults The importance is 1.
No keywords are defined.
The power level is 10.
The name is the short version of the port name; for example, Gi1.0.2 for Gigabit Ethernet 1/0/2.
The role is the model number.
Command Modes
Privileged EXEC
Command History Release
12.2(50)SE
Examples
This example shows how to enable and configure EnergyWise on the PoE port.
Switch# configure terminal
Enter configuration commands, one per line.
Switch(config)# energywise domain cisco secret cisco protocol udp port 43440 ip 2.2.4.30
Switch(config)# interface gigabitethernet1/0/3
Switch(config-if)# energywise level 10 recurrence importance 90 at 0 8 * * *
Switch(config-if)# energywise level 0 recurrence importance 90 at 0 20 * * *
Switch(config-if)# energywise inportance 50
Switch(config-if)# energywise name lobbyInterface.3
Switch(config-if)# energywise role role.lobbyaccess
Switch(config-if)# end
Related Commands Command
show energywise
show energywise
show energywise
OL-13271-03
(Optional) Specify the EnergyWise-specific port name.
You can enter alphanumeric characters and symbols such as #, (, %, !, or
•
&.
Do not use an asterisk (*) or a blank space between the characters and
•
symbols.
(Optional) Specify the role of the port in the domain. For example,
lobbyport.
You can enter alphanumeric characters and symbols such as #, (, %, !, or
•
&.
Do not use an asterisk (*) or a blank space between the characters and
•
symbols.
Modification
This command was introduced.
Description
Displays the EnergyWise settings and status.
domain Displays the domain to which the entity belongs.
recurrence Displays the recurrence settings and status.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
energywise (interface configuration)
End with CNTL/Z.
2-155