Switchport Voice Detect - Dell Catalyst 3130 Command Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands

switchport voice detect

Use the switchport voice detect interface configuration command on the switch stack or on a standalone
switch to detect and recognize a Cisco IP phone. Use the no form of this command to return to the default
setting.
Syntax Description
cisco-phone
full-duplex
Command History Release
12.2(40)EX1
Usage Guidelines Use this command to detect and recognize a Cisco IP phone.
Examples This example shows how to enable detection and recognition of a Cisco IP phone on the switch:
Switch(config)# interface gigabitethernet1/0/1
Switch(config-if)# switchport voice detect cisco-phone
This example shows how to disable detection and recognition of a Cisco IP phone on the switch:
Switch(config)# interface gigabitethernet1/0/1
Switch(config-if)# no switchport voice detect cisco-phone
You can verify your settings by entering the show run interfaces interface-id privileged EXEC
command.
Related Commands
No related commands.
OL-12248-03
switchport voice detect cisco-phone [full-duplex]
no switchport voice detect cisco-phone [full-duplex]
Configure the switch to detect and recognize a Cisco IP phone.
(Optional) Configure the switch to only accept a full-duplex Cisco IP phone.
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3120 for HP Command Reference
switchport voice detect
2-803