Clear Errdisable Interface - Dell Catalyst 3130 Command Reference Manual

clear errdisable interface

clear errdisable interface
Use the clear errdisable interface privileged EXEC command on the switch stack or on a standalone
switch to re-enable a VLAN that was error disabled.
Syntax Description vlan-list
Command Default
No default is defined
Command Modes
Privileged EXEC
Command History Release
12.2(40)EX1
Usage Guidelines
You can re-enable a port by using the shutdown and no shutdown interface configuration commands,
or you can clear error disable for VLANs by using the clear errdisable interface command.
Examples
This example shows how to re-enable all VLANs that were error-disabled on Gigabit Ethernet port 4/0/2.
Switch# clear errdisable interface gigabitethernet4/0/2 vlan
Related Commands Command
errdisable detect cause
errdisable recovery
show errdisable detect
show errdisable recovery
show interfaces
err-disabled
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
2-74
clear errdisable interface interface-id vlan [vlan-list]
(Optional) Specify a list of VLANs to be re-enabled. If a vlan-list is not
specified, then all VLANs are re-enabled.
Modification
This command was introduced.
status
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
Description
Enables error-disabled detection for a specific cause or all causes.
Configures the recovery mechanism variables.
Displays error-disabled detection status.
Display error-disabled recovery timer information.
Displays interface status of a list of interfaces in error-disabled state.
OL-13271-03