Table of Contents
Advertisement
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show ip dhcp snooping database
Use the show ip dhcp snooping database user EXEC command to display the status of the DHCP
snooping binding database agent.
This command is supported only if your switch is running the IP services feature set.
Syntax Description
detail
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(40)EX1
Examples
This is an example of output from the show ip dhcp snooping database command:
Switch> show ip dhcp snooping database
Agent URL :
Write delay Timer : 300 seconds
Abort Timer : 300 seconds
Agent Running : No
Delay Timer Expiry : Not Running
Abort Timer Expiry : Not Running
Last Succeded Time : None
Last Failed Time : None
Last Failed Reason : No failure recorded.
Total Attempts
Successful Transfers :
Successful Reads
Successful Writes
Media Failures
OL-12248-03
show ip dhcp snooping database [detail] [ | {begin | exclude | include} expression]
(Optional) Display detailed status and statistics information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
:
:
:
:
0
Startup Failures :
0
Failed Transfers :
0
Failed Reads
:
0
Failed Writes
:
0
Cisco Catalyst Blade Switch 3120 for HP Command Reference
show ip dhcp snooping database
0
0
0
0
2-537
Advertisement
Table of Contents
