Dot1X Credentials (Global Configuration) - Dell Catalyst 3130 Command Reference Manual

dot1x credentials (global configuration)

dot1x credentials (global configuration)
Use the dot1x credentials global configuration command to configure a profile on a supplicant switch.
Syntax Description
profile
Defaults No profile is configured for the switch.
Command Modes Global configuration
Command History Release
12.2(50)SE
Usage Guidelines You must have another switch set up as the authenticator for this switch to be the supplicant.
Examples
This example shows how to configure a switch as a supplicant:
Switch(config)# dot1x credentials profile
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command
cisp enable
show cisp
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
2-126
dot1x credentials profile
no dot1x credentials profile
Specify a profile for the supplicant switch.
Modification
This command was introduced.
Description
Enables Client Information Signalling Protocol (CISP).
Displays CISP information for a specified interface.
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
OL-13271-03