Chapter 2
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
This example shows how to specify a range of physical ports to which an interface-level class map in a
hierarchical policy map applies:
Switch(config)# class-map match-all class4
Switch(config-cmap)# match input-interface gigabitethernet2/0/1 - gigabitethernet2/0/5
Switch(config-cmap)# exit
You can verify your settings by entering the show class-map privileged EXEC command.
Related Commands
Command
class-map
show class-map
OL-13271-03
Description
Creates a class map to be used for matching packets to the class whose name
you specify.
Displays quality of service (QoS) class maps.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
match (class-map configuration)
2-323