Dell Catalyst 3130 Command Reference Manual page 155

Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
If you enter the dot1x control-direction in interface configuration command to enable unidirectional
control, this appears in the show dot1x all command output:
ControlDirection
If you enter the dot1x control-direction in interface configuration command and the port cannot support
this mode due to a configuration conflict, this appears in the show dot1x all command output:
ControlDirection
Related Commands Command
show dot1x
interface-id]
OL-13271-03
= In
= In (Disabled due to port settings)
Description
[all | interface Displays control-direction port setting status for the specified
interface.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
dot1x control-direction
2-125