Table of Contents
Advertisement
show diagnostic
show diagnostic
Use the show diagnostic user EXEC command to display the online diagnostic test results and the
supported test suites.
Syntax Description
content
switch [number | all]
post
result
detail
test
schedule
Cisco Catalyst Blade Switch 3120 for HP Command Reference
2-478
show diagnostic content switch [number | all] [ | {begin | exclude | include} expression]
show diagnostic post [ |{begin | exclude | include} expression]
show diagnostic result switch [number | all] [detail | test {name | test-id | test-id-range | all}
[detail]] [ | {begin | exclude | include} expression]
show diagnostic schedule switch [number | all] [ | {begin | exclude | include} expression]
show diagnostic status [ | {begin | exclude | include} expression]
show diagnostic switch [number | all] [detail] [ | {begin | exclude | include} expression]
Display test information including the test ID, the test attributes, and the
supported coverage test levels for specific tests and for switches.
When entering the content, result, schedule, and switch keywords, you
can specify the switches by using one of these options.
•
•
number and all options are supported only on stacking-capable
switches.
Use the show diagnostic switch [number | all] command to display the
diagnostic test results for the switch or the switch stack. For information
about this parameter and the result keyword, see the "Usage
Guidelines" section.
Display the power-on self-test (POST) results.
Display the diagnostic test results.
(Optional) Display the detailed test results.
(Optional) Specify the test results to display:
•
•
•
•
Display the scheduled diagnostic tests.
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
(Optional) Use the number parameter to display test information for
a specific switch. The switch number is the stack member. If the
switch is a standalone switch, the switch number is 1. If the switch
is a stack master or a stack member, the range is 1 to 9, depending
on the switch member numbers in the stack.
(Optional) Use the all keyword to display all the test information for
the switch or the switch stack.
name—Enter the name of the diagnostic test to display results only
for this test.
test-id—Enter the test ID number to display results only for this
test.
test-id-range—Enter the range of test ID numbers to display results
only for these tests.
all—Enter this keyword to display results for all the tests.
OL-12248-03
Advertisement
Table of Contents
