Mls Qos Srr-Queue Input Buffers - Dell Catalyst 3130 Command Reference Manual

Blade switch
Table of Contents

Advertisement

mls qos srr-queue input buffers

mls qos srr-queue input buffers
Use the mls qos srr-queue input buffers global configuration command on the switch stack or on a
standalone switch to allocate the buffers between the ingress queues. Use the no form of this command
to return to the default setting.
Syntax Description
percentage1
percentage2
Defaults
Ninety percent of the buffers is allocated to queue 1, and 10 percent of the buffers is allocated to queue 2.
Command Modes
Global configuration
Command History
Release
12.2(40)EX1
Usage Guidelines
You should allocate the buffers so that the queues can handle any incoming bursty traffic.
Examples
This example shows how to allocate 60 percent of the buffer space to ingress queue 1 and 40 percent of
the buffer space to ingress queue 2:
Switch(config)# mls qos srr-queue input buffers 60 40
You can verify your settings by entering the show mls qos interface [interface-id] buffers or the show
mls qos input-queue privileged EXEC command.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
2-346
mls qos srr-queue input buffers percentage1 percentage2
no mls qos srr-queue input buffers
Percentage of buffers allocated to ingress queues 1 and 2. The range is 0 to
100. Separate each value with a space.
Modification
This command was introduced.
Chapter 2
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
OL-13271-03

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3032

Table of Contents