Nmsp Attachment Suppress - Dell Catalyst 3130 Command Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands

nmsp attachment suppress

Use the nmsp attachment suppress interface configuration mode command to suppress the reporting
of attachment information from a specified interface. This command is available only when your switch
is running the cryptographic (encrypted) software image. Use the no form of this command to return to
the default setting.
Syntax Description This command has no arguments or keywords.
Defaults
This command has no default setting.
Command Modes
Interface configuration
Command History Release
12.2(50)SE
Usage Guidelines
Use the nmsp attachment suppress interface configuration command to configure an interface to not
send location and attachment notifications to a Cisco Mobility Services Engine (MSE).
Examples
This example shows how to configure an interface to not send attachment information to the MSE:
Switch(config)# switch interface interface-id
Switch(config-if)# nmsp attachment suppress
Related Commands Command
nmsp
show nmsp
OL-13271-03
nmsp attachment suppress
no nmsp attachment suppress
Modification
This command was introduced.
Description
Enables Network Mobility Services Protocol (NMSP) on the
switch.
Displays the NMSP information.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
nmsp attachment suppress
2-377